Asus IPIBL-TX

Motherboard description Motherboard manufacturer's name: Asus IPIBL-TX
HP/Compaq name: Burbank-GL8E

CPU/Processor Socket: 775
Supports the following processors:
Intel Core 2 Quad (Yorkfield core) Q9xxx
Intel Core 2 Duo (Wolfsdale core) E8xxx
Intel Core 2 Quad (Kentsfield core) up to Q6600
Core 2 Duo E6x00 (Conroe core) up to E6700
Core 2 Duo E4x00 (Conroe core) up to E4400

Front-side bus (FSB) 800/1066/1333 MHz

Chipset Intel G33

BIOS features Keyboard combination to used to enter BIOS: F10
System BIOS core brand: AMI

Form factor micro-ATX: 9.6 in X 9.6 in

Memory Dual channel memory architecture
Four 240-pin DDR2 DIMM sockets
Supported DIMM types:
PC2-5300 (667 MHz)
PC2-6400 (800 MHz)
Non-ECC memory only, unbuffered
Supports 2GB DDR2 DIMMs
Supports up to 8 GB on 64 bit PCs
Supports up to 4 GB* on 32 bit PCs



NOTE:  *Actual available memory may be less

Expansion slots Two PCI
One PCI Express x16 graphics (for graphics cards)
Four PCI Express x1 (for cards such as network, sound, tv-tuner)

Video graphics Integrated graphics using Intel GMA 3100
Also supports PCI Express x16 graphics cards



NOTE:  Either integrated graphics or the PCI Express x16 slot are usable at one time; they are not usable concurrently.

Serial ATA Six SATA connectors:
Supports 1 SATA-150 or SATA-300 disk drive on each SATA connector
Speed up to 1.5 Gb/sec or 3.0 Gb/sec, complying with SATA 1.0 and SATA 2.0 specifications



NOTE:  The faster rate of 3.0 Gb/sec requires that both the hard drive and the motherboard support it. If one or the other does not support 3.0 Gb/sec, the PC negotiates down to the slower 1.5 Gb/sec.

RAID Onboard RAID controller: ICH9R
Selected Burbank models ship RAID-ready (For Spring 08, only selected CTO models will ship RAID-ready)
RAID modes supported*:
RAID 0
RAID 1



NOTE:  RAID 5 requires three HDDs and RAID 10 requires four HDDs. While this motherboard may be able to support RAID 5 or 10, only RAID 0 and RAID 1 modes are supported on computer models using this motherboard.

Onboard audio Audio CODEC: ALC888S
7.1 channel high-definition audio  
Onboard LAN  1 Intel 82566DC 10/100/1000 Mb/s (Gigabit Ethernet) Integrated LAN



NOTE:  Gigabit Ethernet is backwards compatible with 10/100 Mb/s network hardware.

Onboard USB  USB 2.0
Twelve ports total
Four connectors on back panel
Six headers (four 1x4 and two 2x5 USB headers) support eight additional USB ports/devices



NOTE:  Some USB ports may not be available externally for customer use. For more information, see model specifications.

Onboard 1394  Type: IEEE 1394a 400Mb/s
Agere LFW3227 controller chip
Two ports total
One port on back panel
One header on motherboard supporting one additional port/device

Back panel I/0 One PS/2 mouse port (green)
One PS/2 keyboard port (purple)
One coaxial SPDIF out
One coaxial SPDIF in
One VGA port
Four USB 2.0
One 6-pin IEEE 1394a
One RJ-45 networking port
Six Stereo-mini audio jacks for:
Line-in (light blue)
Microphone-in (pink)
Line-out (lime)
Center/Subwoofer-out (yellow-orange)
Side speaker-out (gray)
Rear speaker-out (black)

Internal connectors One 24-pin ATX power connector
One 4-pin ATX power connector
Six SATA connectors
One floppy drive connector
Two 12v fan connectors for CPU fan and PC fan
One 9-pin header for power button, reset button, power LED, and HDD LED
Six USB 2.0 headers supporting 8 USB ports or devices
One IEEE 1394a header
One SPDIF audio output header
One 4-pin audio line-input connector (interrupts line input on back panel, Vista capable, requires matching front audio jack module)
One 9-pin audio header for headphone-out and microphone-in (yellow, Vista capable, requires matching front audio jack module)
One Intel high-definition Audio/Modem Link (2x8 HDMI connector)
One jumper for resetting BIOS settings
One jumper to disable BIOS password checking

                               
登录/注册后可看大图

                               
登录/注册后可看大图