FUJITSU富士通AMILO A1645/g / A7645笔记本电脑BIOS 1.05c版

FUJITSU富士通AMILO A1645/g / A7645笔记本电脑BIOS 1.05c版

current BIOS V1.05c

Solved problems:
- none
Known errors, problems and restrictions:
- If the BIOS update from 1.00C to 1.02C (WinFlash & DOS) has finished, in some
cases the keyboard & the touchpad do not work any longer and the system
automatically  shuts down after a few seconds. This is due to the KBC BIOS is
updated from 1.00 (incl. BIOS 1.00C) to 1.01 (incl. BIOS 1.02C). Afterwards the
system can be powered on without any problems.
- Downgrading from BIOS 1.02C to 1.00C in DOS mode might cause a CMOS checksum
bad error during the first system boot. This is due to the KBC BIOS has been
changed (from 1.01 to 1.00). If this phenomenon appears there is the need to
enter the BIOS setup menu and load the "Optimal Defaults".
Additional information:
- the VGA memory size (shared memory) will be adjusted automatically dependend on
the available system memory: 256MB system memory -> 64MB shared memory or
512MB and more system memory -> 128MB shared memory.
The possibility to adjust the system VGA memory in the BIOs manually still

255ki6c.zip (446.95 KB, 下载次数: 0)

2008-9-25 11:35 上传

点击文件名下载附件