|
马上注册,结交更多好友,享用更多功能,让你轻松玩转社区。
您需要 登录 才可以下载或查看,没有账号?注册
×
FUJITSU富士通AMILO Pro V7010笔记本电脑BIOS 1.10版
current BIOS V1.10:
Solved Problems:
- In WinXP environment, sometimes KB and mouse have no response after resuming from S3.
- The system does not support 2x 1GB memory modules from Samsung.
Known errors, problems and restrictions:
- The master password for a HDD might not work after updating the BIOS. This problem was seen very rarely. To avoid this, the PW should be cleared before flashing the new BIOS.
- The system hangs very sporadically in S4 (Hibernate) status.
- Some mice might work only after a reboot when a Y-cable is used at the port replicator.
- After pressing the power button it last about 10s until the BIOS POST screen appears.
- The [Quick boot] feature in BIOS setup has no influence on the boot time, as the ATI chipset does the memory handling in a different way (compared e.g. to Intel chip sets).
- In some special cases the external monitor might not work properly. This is e.g. when both monitors are set to primary monitor or during the boot period, if the user has enabled [LCD and CRT] setting in the BIOS setup.
- Charging the battery to 100% is only possible when the capacity is below 90%.
- If a dial up connection via internal modem is established, the insertion of a memory card could causes a blue screen.
BF3C21.zip
(420.92 KB, 下载次数: 0)
|
|