EVEREX(FIC) StepNote XT5300T笔记本bios 00E版

EVEREX(FIC) StepNote XT5300T笔记本bios  00E版

Version:00F
Build date:2007/06/23

1.Enhance flashing the firmware stability.

Version:00E
Build date:2007/06/14

1.Modify light sensor function.

Version:00D
Build date:2007/06/08

1.Delay INVENA from 10ms to 120ms.
2.Modify light sensor function.(modify reference A/D value)

Version:00C
Build date:2007/05/23

1.Modify INVENA function.
2.Fix LED control function.(please refer attached excel file)

Version:00B
Build date:2007/05/08

1.Disable Multikey SMB support.
2.Disable MB90 h/w SMB PEC support.
3.Modify light sensor function.
4.Prepare eight levels of fan control function.
5.Computers don't shut down after finishing to flash F/W.
6.Add power led control mode2.(for PTT50, EC address 0xE0 bit7)
7.Modify INVENA function.(for NVIDIA)
8.Protected function for controlling PMX F/W version.

ps.The 1 and 2 items can add 5.5k rom size

Version:00A
Build date:2007/04/18

1.Add checksum function.
2.Fix: When remove the AC adapter, the system auto shut down issue.(Watch dog timeout)
3.Modify fan initial duty to 64%.
4.Fix: S3 resume shut down issue.(Set polling interval to 0)

Version:009
Build date:2007/02/09

1.Add power on sequence for ATI.
2.Add power on sequence for NVIDIA.
3.Fix VRON_VCCP issue.
4.Modify MainSW_VA timing.
5.Modify fan initial duty to 80%.

Version:008
Build date:2007/01/23

1.Add Audio DJ function.
2.Modify light sensor function.
3.Modify auto fan function.
4.Modify VIA power on sequence.
5.Remove GPIO B port function.
6.Add charge current select function.(1P==>QUICK CHARGE, 2P==>FAST CHARGE)
7.Modify fan PWM frequence.(0x02-0xff (2K-256KHz step 1KHz))

007:

1.Fix light sensor flash issue.
2.Fix battery plug-in restart issue.
3.Add auto fan control function.
4.Fix LID issue.

006:

1.Set GPIOA3 initial output low.
2.Add PWM function.(2 channel)
3.Add light sensor function.
4.Add power on sequence function.
XT5001J_10E.zip (463 KB, 下载次数: 0)

2008-9-28 09:23 上传

点击文件名下载附件