FUJITSU富士通LIFEBOOK S761笔记本电脑VPro BIOS更新1.15版

FUJITSU富士通LIFEBOOK S761笔记本电脑VPro BIOS更新1.15版

Current BIOS V. 1.15:

Solved problems:

- When the system is running in compatible mode with following boot
  priority setting: 1st Network, 2nd Drive 0 HDD --> the system
  will not boot from HDD when no LAN boot environment is provided.
- The HDD ability on Windows XP becomes Multiword DMA when AHCI is
  set to disabled.
- The Setup Item of VT-d of GABI Settings API is not hided on the
  machine not supported VT-d.
- Specific Ten Keyboard (FMV-NTKB3) does not work when it is
  connected to USB port in port replicator.
- The system stops in POST when specific USB device(REGZA phone)
  is connected.
- USB device may not be recognized on DOS.
- MS-DOS does not boot on specific device configuration.
- 98DOS's "Time Remaining" location is wrong if SOL is enabled.
- Terminal Type is always set to ANSI mode if SOL is enabled.
- The system can't boot from Redirect Legacy FD if IDER is enabled.
- The backlight brightness becomes maximum after reboot on
  Windows XP without Indicator Utility.  
- DISK Protect does not work when AHCI is disabled.
- The system stops in POST when the specific USB token is
  connected to USB3.0 port.
- The device does not work when it is connected to USB Hub Port1
  connected
  to USB3.0 port.
       
       
Known errors, problems and restrictions:
- None
       
       
Additional information:
- Microcode Update (D2 Stepping M12206A7 Rev.17).
- Reduced S3 resume time.