Winbond Trusted Platform Module (TPM)驱动程序(Windows XP)6.1.42.2035 Winbond, Module, Platform, TPM, Trusted

vistafans

Winbond Trusted Platform Module (TPM)驱动程序(Windows XP)6.1.42.2035

Winbond Trusted Platform Module (TPM) Device Driver

Package Version: 6.80.0004

By downloading, installing, copying, or otherwise using the Winbond TPM Device Driver, you accept the terms of the license agreement provided in the TPMEULA.txt
file.

Package Contents
================
* setup.exe           - The setup application
* TPM_Installer.msi   - MSI installation package
* TPM_MSM.msm         - MSM installation file
* TPMEULA.txt         - TPM End User License Agreement
* readme.txt          - This Release Letter
* TDDConfig.reg       - TPM Device Driver configuration file

Description
============
This package provides the Winbond TPM driver for Microsoft(R) Windows(R) XP and Microsoft Windows 2000.
The driver implements the interface as defined in the TCG Software Stack (TSS) Specification Version 1.2.

Installation
============
This package contains the files required to install the TPM Device Driver on systems with an on-board Winbond TPM 1.2 device.

You must have administrator privileges to install/update the driver.

Instructions:
1. Edit the file TDDConfig.reg as follows:
   a. The first line in TDDConfig.reg file defines a registry key, which is written under HKEY_LOCAL_MACHINE on successful driver installation.
   b. The second line in TDDConfig.reg file specifies the TPM Device Driver version
   c. The Third line in TDDConfig.reg file defines whether the installer detects TPM presence prior to installation.
2. Install as follows:
   * For Normal install:
     - Double-click TPM_Installer.msi or run:
       <package path>\setup.exe -i <package path>\TPM_Installer.msi
       where <package path> stands for the full path to the package folder.
     - Follow the on-screen instructions to complete the driver installation.
   * For Silent install:
     - Run:
       <package path>\setup.exe -s -i <package path>\TPM_Installer.msi
       where <package path> stands for the full path to the package folder.

Limitations
===========
None.

Changes from Previous Release
=============================
From Package Version 6.80.0003
* Updated to driver version 6.1.42.2035.
* The following changes were applied to setup.exe:
  - Enabled using hyphens in the path name when calling setup.exe.
  - Enabled running from any path without specifying the full path to the MSI
    file (assuming it resides in the same folder as the setup.exe).

From Package Version 6.80.0002
* Added support for Microsoft(R) Windows(R) 2000(R).

From Package Version 6.1.42.2019
* New package number: 6.80.0002
* New registry entry: "SOFTWARE\Winbond Electronics Corporation\TPM Device Driver"
  "DriverVersion" "6.1.42.2018"

From Package Version 6.1.42.2018
* Fixed wrong registry entry for TDDL file.

From Package Version 5.1.47.2016
* Fixed the issue: If BIOS reports a TPM PnP node and IRQ resource is not
  allocated to the driver, the driver causes failure during system shut-down or hibernate.
* Fixed compatibility issues in INF.

From Package Version 5.1.47.2015
* If an IRQ resource is not allocated, driver works in polling mode.

From Package Version 5.1.47.2014
* Driver reads command duration timeout from TPM.

From Package Version 5.1.47.2011
* Added support for WPCT200 device.

From Package Version 5.0.47.2006
* Improved command handling.
* Added 64-bit support.

南油高守

hoooooooooooooooooooooooooooooooooo